234XS

5,600,000 

▼ Input Connectors: XLR
▼ Input Type: Electronically balanced/unbalanced, RF filtered
▼ Input Impedance: Balanced >50k ohm, unbalanced >25k ohm
▼ Max Input: >+22dBu balanced or unbalanced
▼ CMRR: >40dB, typically >55dB at 1kHz
▼ Output Connectors: XLR
▼ Output Type: Impedance-balanaced/unbalanced, RF filtered
▼ Output Impedance: Balanced 60 ohm, unbalanced 30 ohm
▼ Max Output: >+21dBu balanced/unbalanced into 2k ohms or greater
▼ Bandwidth: 20Hz to 20kHz, +/-0.5dB
▼ Frequency Response: < 3 Hz to > 90 kHz, +0/-3 dB
▼ Signal to Noise Ratio: Ref: +4 dBu, 22 kHz measurement bandwidth
▼ Signal-to-Noise (Stereo Mode): >94dB (Low Output), >93dB (Mid Output), >90dB (High Output)
▼ Signal-to-Noise (Mono Mode): >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output)
▼ Dynamic Range: > 106 dB, unweighted, any output
▼ THD+Noise: < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
▼ Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz
▼ Crossover Frequencies (Stereo Mode): Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting)
▼ Crossover Frequencies (Mono Mode): Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz
▼ Crossover Filter Type: Linkwitz-Riley, 24 dB/octave, state-variable
▼ Low cut Switch: Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
▼ Phase Invert Switch: Inverts the phase at the output, one switch per output.
▼ x1 / x10 Switch: Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
▼ Mode Switch: Selects stereo/mono and 2/3/4-way operation
▼ LF Sum Switch: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode.
▼ Indicators: Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
▼ Operating Voltage: 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz
▼ Operating Temperature: 32°F to 113°F (0°C to 45°C)
▼ Power Consumption: 15W
▼ Power Connector: IEC receptacle
▼ Dimensions: 1.75″ H X 19″ W X 6.9″ D (4.4cm x 48.3cm x 17.5cm)
▼ Unit Weight: 4.0 lbs. (1.8 kg)
▼ Shipping Weight: 5.8 lbs. (2.6 kg)