223X
3,730,000 ₫
| ▼ Input Connectors: 1/4″ TRS |
| ▼ Input Type: Electronically balanced/unbalanced, RF filtered |
| ▼ Input Impedance: Balanced >50k ohm, unbalanced >25k ohm |
| ▼ Max Input: >+22dBu balanced or unbalanced |
| ▼ CMRR: >40dB, typically >55dB at 1kHz |
| ▼ Output Connectors: 1/4″ TRS |
| ▼ Output Type: Impedance-balanaced/unbalanced, RF filtered |
| ▼ Output Impedance: Balanced 200 ohm, unbalanced 100 ohm |
| ▼ Max Output: >+21dBu balanced/unbalanced into 2k ohms or greater |
| ▼ Bandwidth: 20Hz to 20kHz, +/-0.5dB |
| ▼ Frequency Response: < 3 Hz to > 90 kHz, +0/-3 dB |
| ▼ Signal to Noise Ratio: Ref: +4 dBu, 22 kHz measurement bandwidth |
| ▼ Signal-to-Noise (Stereo Mode): >94dB (Low Output), >91dB (High Output) |
| ▼ Signal-to-Noise (Mono Mode): >94dB (Low Output), >93dB (Mid Output), >91dB (High Output) |
| ▼ Dynamic Range: > 106 dB, unweighted, any output |
| ▼ THD+Noise: < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
| ▼ Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz |
| ▼ Crossover Frequencies (Stereo Mode): Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| ▼ Crossover Frequencies (Mono Mode): Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| ▼ Crossover Filter Type: Linkwitz-Riley, 24 dB/octave, state-variable |
| ▼ Low cut Switch: Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
| ▼ Phase Invert Switch: Inverts the phase at the output, one switch per output. |
| ▼ x1 / x10 Switch: Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel |
| ▼ : markings by a factor of 1 or 10, one switch per channel. |
| ▼ Mode Switch: Selects stereo/mono and 2/3-way operation |
| ▼ LF Sum Switch: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
| ▼ Indicators: Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
| ▼ Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ |
| ▼ Operating Temperature: 32°F to 113°F (0°C to 45°C) |
| ▼ Power Consumption: 15W |
| ▼ Power Connector: IEC receptacle |
| ▼ Dimensions: 1.75″ H X 19″ W X 6.9″ D (4.4cm x 48.3cm x 17.5cm) |
| ▼ Unit Weight: 3.7 lbs. (1.7 kg) |
| ▼ Shipping Weight: 5.4 lbs. (2.5 kg) |
