2231
16,470,000 ₫
| ▼ Input Connectors: 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip |
| ▼ Input Type: Electronically balanced/unbalanced, RF filtered |
| ▼ Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm |
| ▼ Max Input: >+21dBu balanced or unbalanced |
| ▼ CMRR: >40dB, typically >55dB at 1kHz |
| ▼ Output Connectors: 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip |
| ▼ Output Type: Impedance-balanced/unbalanced, RF filtered |
| ▼ Output Impedance: Balanced 200 ohm, unbalanced 100 ohm |
| ▼ Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| ▼ Bandwidth: 20Hz to 20kHz, +/-0.5dB |
| ▼ Frequency Response: <10Hz to >50kHz, +0.5/-3dB |
| ▼ Signal-to-Noise (NR In: +/-6 and +/-15dB ranges): >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth |
| ▼ Dynamic Range (NR In: +/-6dB and +/-15Db: >120dB, unweighted |
| ▼ : |
| ▼ ranges): |
| ▼ Signal-to-Noise (NR Out: +/-6dB range): >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth |
| ▼ Dynamic Range (NR Out: +/-6dB range): >112dB, unweighted |
| ▼ Signal-to-Noise (NR Out: +/-15dB range): >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth |
| ▼ Dynamic Range (NR Out: +/-15dB range): >108dB, unweighted |
| ▼ THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz |
| ▼ Interchannel Crosstalk: <-80dB, 20Hz to 20kHz |
| ▼ Noise Reduction: Up to 20dB of dynamic broadband noise reduction |
| ▼ NR Switch: Activates dbx Type III Noise Reduction |
| ▼ Bypass Switch: Bypasses the graphic equalizer section in the signal path |
| ▼ Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter |
| ▼ Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range |
| ▼ I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
| ▼ Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB |
| ▼ Indicators: NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) |
| ▼ Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz |
| ▼ Power Consumption: 28W |
| ▼ Power Connector: IEC receptacle |
| ▼ Dimensions: 5.25″ H X 19″ W X 7.9″ D (13.335cm x 48.3cm x 20.1cm) |
