1231
11,190,000 ₫
| ▼ Input Connectors: 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip |
| ▼ Input Type: Electronically balanced/unbalanced, RF filtered |
| ▼ Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm |
| ▼ Max Input: >+21dBu balanced or unbalanced |
| ▼ CMRR: >40dB, typically >55dB at 1kHz |
| ▼ Output Connectors: 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip |
| ▼ Output Type: Impedance-balanced/unbalanced, RF filtered |
| ▼ Output Impedance: Balanced 200 ohm, unbalanced 100 ohm |
| ▼ Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| ▼ Bandwidth: 20Hz to 20kHz, +0.5/-1dB |
| ▼ Frequency Response: <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range |
| ▼ Dynamic Range: 109dB; 115dB |
| ▼ Signal to Noise Ratio: 90dB, 97dB |
| ▼ THD+Noise: <0.005% |
| ▼ Interchannel Crosstalk: <-80db, 20Hz to 20kHz |
| ▼ Bypass Switch: Bypasses the graphic equalizer section in the signal path |
| ▼ Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter |
| ▼ Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range |
| ▼ I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu |
| ▼ Indicators: EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) |
| ▼ Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz |
| ▼ Power Consumption: 24W |
| ▼ Power Connector: IEC receptacle |
| ▼ Dimensions: 5.25″ H X 19″ W X 7.9″ D (13.4cm x 48.3cm x 20.1cm) |
| ▼ Unit Weight: 10.6 lbs. |
| ▼ Shipping Weight: 11.6 lbs. |
