1215

8,070,000 

▼ Input Connectors: 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip
▼ Input Type: Electronically balanced/unbalanced, RF filtered
▼ Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
▼ Max Input: >+21dBu balanced or unbalanced
▼ CMRR: >40dB, typically >55dB at 1kHz
▼ Output Connectors: 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip
▼ Output Type: Impedance-balanced/unbalanced, RF filtered
▼ Output Impedance: Balanced 200 ohm, unbalanced 100 ohm
▼ Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
▼ Bandwidth: 20Hz to 20kHz, +0.5/-1dB
▼ Frequency Response: <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range
▼ Dynamic Range: 109dB; 115dB
▼ Signal to Noise Ratio: 90dB, 97dB
▼ THD+Noise: <0.005%
▼ Interchannel Crosstalk: <-80db, 20Hz to 20kHz
▼ Bypass Switch: Bypasses the graphic equalizer section in the signal path
▼ Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
▼ Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
▼ I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
▼ Indicators: EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
▼ Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
▼ Power Consumption: 24W
▼ Power Connector: IEC receptacle
▼ Dimensions: 3.5″ H X 19″ W X 7.9″ D (8.9cm x 48.3cm x 20.1cm)
▼ Unit Weight: 8.5 lbs. (3.9 kg)
▼ Shipping Weight: 9.5 lbs. (4.3 kg)