UB2222FX-PRO

UB2222FX-PRO

Giá: 8.140.000

 

 

Mixer Behringer EURORACK UB2222FX-PRO

Thông số kỹ thuật Mixer Behringer EURORACK UB2222FX-PRO

  • Ultra-Low Noise Thiết kế 22-Input 2/2-Bus Mic / Line Mixer với Premium Mic tiền khuếch đại và Multi-FX Processor.
  • Thiết kế tiếng ồn cực thấp, cao nhất khoảng không có thể, âm thanh cực kỳ trong suốt.
  • 8 nhà nước-of-the-nghệ thuật, studio-lớp IMP “Invisible” Mic tiền khuyếch đại với 130 dB dải động cho 24-bit, 192 đầu vào tỷ lệ lấy mẫu kHz.
  • Studio cấp bộ xử lý FX stereo với 100 mẫu thiết lập tuyệt vời bao gồm reverb, chorus, flanger, delay, pitch shifter và khác nhau đa tác dụng.
  • Hiệu quả, vô cùng âm nhạc 3-band EQ với tham số bán giữa ban nhạc cộng với chuyển đổi bộ lọc cắt thấp trên tất cả các kênh mono.
  • Chèn vào mỗi kênh mono cho kết nối linh hoạt của thiết bị phía ngoài.
  • 16 cân, đầu vào dòng cao khoảng không với + 4 / -10 lựa chọn cấp độ trên các kênh âm thanh stereo.

 

 

Inputs Mono Inputs

Microphone Inputs (IMP Invisible Mic Preamp)
Type: XLR, electronically balanced, discrete input circuit

Mic E.I.N. (20Hz – 20kHz)
@ 0 ohms source resistance: -134dB / 135.7dB A-weighted
@ 50 ohms source resistance: -131dB / 133.3dB A-weighted
@ 150 ohms source resistance: -129dB / 130.5dB A-weighted

Frequency response
< 10Hz – 150kHz (-1dB), < 10Hz – 200kHz (-3dB)

Gain range: +10 to +60dB
Max. input level: +12dBu @ +10dB gain
Impedance: approx. 2.6k ohms balanced
Signal-to-noise ratio: 110dB / 112dB A-weighted (0dBu In @ +22dB gain)

Distortion (THD+N): 0.005% / 0.004% A-weighted

Line Input
Type: 1/4″ TRS connector electronically balanced
Impedance: approx. 20k ohms balanced, 10k ohms unbalanced
Gain range: -10 to +40dB
Max. input level: 30dBu

Stereo Inputs
Type: 1/4″ TRS connector, electronically balanced
Impedance: approx. 20k ohms
Max. input level: +22dBu

Attenuation Fade-out Attenuation (Crosstalk Attenuation)
Main fader closed: 90dB
Channel muted: 89dB
Channel fader closed: 89dB
Frequency Response Microphone input to main out
< 10Hz – 90kHz: +0dB / -1dB
< 10Hz – 160kHz: +0dB / -3dB
EQ Section EQ Mono Channels
Low: 80Hz / ±15dB
Mid: 100Hz – 8kHz / ±15dB
High: 12kHz/ ±15dBEQ Stereo Channels
Low: 80Hz / ±15dB
Low Mid: 500Hz / ±15dB
High Mid: 3kHz / ±15dB
High: 12kHz / ±15dB
AUX Sends Type: 1/4″ TS connector, unbalanced – 2x
Impedance: approx. 120 ohms
Max. output level: +22dBu
AUX Returns Type: 1/4″ TRS connector, electronically balanced – 2x stereo
Impedance: approx. 20k ohms balanced / 10k ohms unbalanced
Max. Input Level: +22dBu
Outputs Main Outputs
Type: XLR, electronically balanced and 1/4″ TRS balanced
Impedance: approx. 240 ohms balanced / 120 ohms unbalanced
Max. Output Level: +28dBuControl Room
Type: 1/4″ TS connector, unbalanced
Impedance: approx. 120 ohms
Max. output level: +22dBu

Headphones Output
Type: 1/4″ TRS connector, unbalanced
Max. output level: +19dBu / 150 ohms (+25dBm)

DSP 24-bit Texas Instruments
Converter: 24-bit Sigma-Delta, 64/128-times oversampling
Sampling Rate: 40kHz
Noise Main mix @ -∞ Channel fader @ -∞ -101dB
Main mix @ -0dB; Channel fader @ -∞ -93dB
Main mix @ 0dB; Channel fader @ 0dB -81dB
Power Supply Mains voltage: 100 to 240 V~, 50/60Hz
Power consumption: 46 W
Fuse: 100-240V~: T 1.6A H
Mains connection: Standard IEC receptacle
Dimensions (HxWxD) 3.5 x 16.9 x 14″ (90 x 430 x 355mm)
Weight 12.1lb (5.5kg)

Sản phẩm liên quan

  • Pro Speaker AD-12

    ◎Professional full-range speaker for indoor. ◎Outstanding quality, wide diapason, wide scope of application, authentic and crystal sound ◎Imported material is used in both enclosure and internal parts. ◎Classic two-way design, high cost-effective Applications: Performance, Bar, multipurpose hall, club, KTV, high-end entertainment facilities etc. Model AD-12 Type 12” Two-way full-range Frequency Response(±3dB) 55Hz-20KHz Sensitivity (1W@1m) 97 […]

  • Ampli DENON DRA-500AE

    Ampli /Receiver AM/FM

  • PRX715XLF

    15″ Self-Powered Extended Low Frequency Subwoofer System 15″ Self-Powered Extended Low Frequency Subwoofer System The PRX715XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, […]

  • A 102 HCS6

    We are all familiar with the phrase “seen but not heard.” With the redefined Jamo A 102 system, Jamo gives you the opportunity to experience the exact opposite