EPM 12

EPM 12

Giá:

The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range.

The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Soundcraft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company’s 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types.

A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Soundcraft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors.

Frequency Response Mic/Line input to any output 20Hz to 20kHz +/-0.5dB
THD & Noise <0.007% -30dBu Input routed to Mix, Mic gain 30dB
Mic Input EIN 22Hz-22kHz unweighted -128dBu (150Ω source)
Bus Noise Mix at Max, Faders down <-85dBu
Crosstalk typically @1kHz Channel Mute >96dB
Fader cut-off (rel +10 mark) >96dB
Aux Send pot offness >86dB
Input & Output Microphone Input 2.4kΩ
Impedances Line Input 11kΩ
Stereo Input 100kΩ
Outputs 75Ω
Input & Output Mic/Line input Maximum Level +17dBu
Levels Line input Maximum Level +30dBu
Stereo Input Maximum Level +30dBu
Mix Output Maximum level +20dBu
Headphones (at 200Ω ) 300mW
EQ (Mono Input) HF 12kHz, ±15dB, shelving
Mid 150Hz – 3.5kHz, ±15dB, Q=1.5
LF 60Hz, ±15dB, shelving
Metering 12-segment LED bargraphs for Mix L&R outputs
Operating conditions Temperature Range – 10ºC to +30ºC
Relative Humidity 0% to 80%
Power Supply Integral lightweight switched-mode PSU
AC mains supply 85V-270V AC, 50/60Hz universal input
Power consumption Less than 20W
Dimensions 432mm(17”)W, 90.5mm(3.56”)H, 362mm(14.25”)D
Weight 6.7kgs(14.77lbs)

Sản phẩm liên quan

  • PRX710

    10″ Two-Way Multipurpose Self-Powered Sound Reinforcement System 10″ Two-Way Multipurpose Self-Powered Sound Reinforcement System PRX710 is a compact and ultra-lightweight speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size. Features 133 dB peak SPL 10″ low-frequency driver for low-distortion and higher SPL 1.5″ diameter next generation […]

  • EFX12

    The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. […]

  • Venere 2.5Venere 2.5

    Venere 2.5 là loa đứng thuộc dòng Venere nổi bật thông qua hình dáng loa, đáp tuyến tần số rộng hơn và một sự hoàn chỉnh về của loa mid. Venere 2.5 có 2,5 đường tiếng, gồm 1 loa treble, 1 loa mid/bass và 1 loa bass. Loa được thiết kế theo hình dáng đàn […]

  • SRX812P

    12″ Two-Way Bass Reflex Self-Powered System 12″ Two-Way Bass Reflex Self-Powered System The SRX800 Series is the next generation high performance powered loudspeaker system comprising three full range and two subwoofer models with an array of features that elevate the SRX800 Series to the best in class of all competitive systems. The full range 12″ […]